Align 3S1P 11.1V 2100mAh - 20C - KX850160A

This Align brand-new battery is great for high discharging, suitable for TREX 450 series, compete with "eXtreme" series.

After using this extra-high rate battery, please keep the voltage of each cell between 3.6V and 3.8V, and charge the battery the day before you intend to use it. Avoid keeping the battery at full charge.

This Li-poly battery features high efficient and high discharge, use a inspection machine to match packs, suitable for TREX 450 series and other professional model airplanes, cars, and guns.

Max Continuous Discharge: 20C, Burst Discharge: 25C. Normal operating temperature is approx. 40-65°C (within 80% of rated discharge). Max. temperature: 80°C.

Recommend to discharge the battery within 80% of rated discharge, keep 90% capacity when over 100 cycles, keep 85% capacity when over 150 cycles. (The cycle life and efficiency will reduce due to high current, high temperature and over-discharge)

Using PCB type wires and anti-hit foams for high current and resisting the hit and pull.

Specifications:
Output: 11.1V (3S1P) 2100mAh - 20C
Dimension: 34x102x20mm
Weight: 140g (Not including connectors)
themodelhelistore.com

Note:
When using high energy Li-poly Battery, please do not over-discharge, over-charge batteries, or result over-high temperature. Discharging capacity can't exceed 80% of the max capacity after full charging to ensure a good cycle performance.Recommend to full charge a brand new battery before using and only discharge the battery 50% for first 5 times to make a good efficiency of the battery. Please make it a habit to always count time for flight, or please set a low voltage protection on ESC (Cell voltage after stopping using can not lower than 3.2V). Do not use the battery at insufficient of voltage.

PS. When using this battery for hovering or F3C flying, recommend to set the battery protection option of ESC at High cutoff voltage protection to ensure the battery life.

Do not expose batteries to sunshine or store/ charge batteries at the temperature up to 35℃ in a airtight car. The environment high temperature could cause the damage or the danger of burst. If the battery becomes hot while high current discharging or flying, please do not charge the battery immediately. Wait to cool down (about 20 mins), then inspect to recharge. If against follow the original factory using rules, possibly cause the battery to inflate or any dangerous accident happens.

Do not leave the charger is operating unattended as it may cause a fire.
themodelhelistore.com