Maxpoly Batteries 6S2P 22.2V 5000mAh - 20C

JST balance connectors and protective silicone block around contacts (LiPo side).

Specifications:
Output: 22.2V (6S2P) 5000mAh
Rating: 20C continuous, 30C burst
Dimension: 60x45x180mm
Weight: 850g
themodelhelistore.com

Note:
When using high energy Li-poly Battery, please do not over-discharge, over-charge batteries, or result over-high temperature. Discharging capacity can't exceed 80% of the max capacity after full charging to ensure a good cycle performance.Recommend to full charge a brand new battery before using and only discharge the battery 50% for first 5 times to make a good efficiency of the battery. Please make it a habit to always count time for flight, or please set a low voltage protection on ESC (Cell voltage after stopping using can not lower than 3.2V). Do not use the battery at insufficient of voltage.

PS. When using this battery for hovering or F3C flying, recommend to set the battery protection option of ESC at High cutoff voltage protection to ensure the battery life.

Do not expose batteries to sunshine or store/ charge batteries at the temperature up to 35℃ in a airtight car. The environment high temperature could cause the damage or the danger of burst. If the battery becomes hot while high current discharging or flying, please do not charge the battery immediately. Wait to cool down (about 20 mins), then inspect to recharge. If against follow the original factory using rules, possibly cause the battery to inflate or any dangerous accident happens.

Do not leave the charger is operating unattended as it may cause a fire.
themodelhelistore.com