Futaba 6EXP (T6EXP) - 6 Channel 2.4GHz TX with 7 Channel R607FS RX

The original was a revelation of affordability, proven performance and programming ease, created to ease the transition from 4-channel sport systems into 6-channel computer systems. Today's system offers the original's appeal, 6EXAS and 6EXH enhancements and the revolutionary, interference-free performance of the 2.4GHz FASST System.

The tiny R607FS receiver weights only 9.8g (7g without case), but is a full range receiver that works every bit as well in normal or giant scale models, allowing simple swaps between models. Unlike other systems, there is no separate aerial module that has to be installed, increasing weight and taking up more space.

Please Note: This transmitter now ships with the R607FS 7 channel receiver and not the R606FS 6 channel receiver as stated on the box graphic.

Set Includes:
T6EXP - 6 Channel 2.4GHz TX (Mode 2 - Left throttle) x 1
R607FS - 7 Channel 2.4GHz RX x 1
Futaba S3003 standard servos x 4
Rechargeable transmitter and receiver packs
Mains charger

Compatible Receivers:
R606FS/R607FS/R616FFM/R617FS

Standard Programming Functions:
Model Select - six model memory
Model Type - select airplane or heli programming in one transmitter
Servo Reversing - on all six channels
Dual Rate/Exponential - for ailerons, elevator and rudder
End Point Adjustment - fine-tunes servo throws on all six channels
Digital Trim - stores trim settings for each model for aileron, elevator, rudder and throttle
Fail Safe - a safety throttle setting in case of loss of transmitter signal
Battery Fail Safe - moves the throttle to a preset position when the airborne pack reaches 3.8V
Range Checking - Power Down reduces transmitter output power for up to one minute, allowing range checking from 50 paces away
Changeable Throttle Stick - select ratchet for airplanes or smooth for helis
Adjustable Stick Length - choose the length that suits your flying style
themodelhelistore.com

Helicopter Specific:
5-Point Normal and Idle Up Throttle/Pitch Curves
Throttle Hold - for autorotation
Revo (Revolution Mixing) - mixes rudder and pitch together
Gyro Mixing - two gyro gain settings can be programmed and selected during flight
Swash to Throttle Mixing - corrects slowing of the engine's speed caused by the swashplate
Swashplate Types - choose from 1S (independent aileron, pitch and elevator servos linked to the swashplate), 3S (120° CCPM), or 3E (90° CCPM)
Swash AFR - Adjustable Function Rate, for use with 1S, 3S or 3E swash types

S3003 Standard Servo Specifications:

Metric		Imperial
Volts Torque Speed 4.8 3.2 Kg.cm 0.23 sec/60° 6.0 4.1 Kg.cm 0.19 sec/60° Dimensions - mm Weight 40.4 x 19.8 x 36 37.2g		Volts Torque Speed 4.8 44.4 oz.in 0.23 sec/60° 6.0 56.9 oz.in 0.19 sec/60° Dimensions - inches Weight 1.6 x 0.8 x 1.4 1.30oz
Further Information
Type Motor Type Bearing Type Analogue/Analog 3 Pole None