Futaba FF7 (T7C) - 7 Channel 2.4GHz TX with 7 Channel R617FS RX

All the functions and features of Futaba’s current 35MHz Field Force 7... but now on 2.4GHz and with even more extras! Other than the short 2.4GHz aerial, it feels just like its best-selling predecessor and the characteristic large LCD, 10 model memory and easy-to-use jog dial remain unchanged. However, it now benefits from the addition of an ailevator mix (two elevator/tailplane halves acting as both ailerons & elevators), a new swash > throttle mix and governor control.

No corners cut - the new 2.4GHz FF7 is supplied complete with Futaba’s new lightweight R617FS 2.4GHz receiver and four high torque S3152 digital servos! Superior ‘channel-hopping’ operating frequency changes every 2 milliseconds - unlike other less advanced systems that operate on one or two fixed frequencies.

Set Includes:
FF7 (T7C) - 7 Channel 2.4GHz TX (Mode 2 - Left throttle) x 1
R617FS - 7 Channel 2.4GHz RX x 1
Futaba S3152 high torque digital servos x 4
Rechargeable transmitter and receiver packs
Mains charger

Compatible Receivers:
R606FS/R607FS/R616FFM/R617FS

Standard Programming Functions:
Dial 'n' Key™ programming
Airplane/heli software
Assignable switches/functions
Up/down timer
Mode 1-4 selectable (modes 3 and 4 available via transmitter software)
Large 72 x 32 LCD screen with adjustable contrast
10-model memory
6-character model naming
Digital trims, trim memory, EPA, subtrims and servo reversing (all channels)
Dual/Triple rates* (aileron/elevator/rudder)
Exponential (aileron/elevator/rudder)
Adjustable throttle cut
Fail-safe
NT8S600B 600mAh Tx NiCd w/dual-output charger
Trainer system (cord required)
Flap switch
Retract switch
Variable rate knob (channel 6)
themodelhelistore.com

Helicopter Specific:
Governor select makes it possible to match rpm/blade speed to maneuvers
Swash to throttle mixing helps heli pilots keep their rpm steady
3 programmable mixes
Throttle curve (5-point normal, idle up 1 & 2)
Pitch curve (5-point normal, idle up 1 & 2)
Revo mixing
Gyro mixing
Hovering throttle
Hovering pitch
Throttle hold
Trim offset
6 swash plate set-ups (5 CCPM options)

S3152 High Torque Digital Servo Specifications:

Metric		Imperial
Volts Torque Speed 4.8 4.9 Kg.cm 0.22 sec sec/60° 6.0 6.2 Kg.cm 0.18 sec/60° Dimensions - mm Weight 41 x 20 x 38 42g		Volts Torque Speed 4.8 69 oz.in 0.22 sec/60° 6.0 87 oz.in 0.18 sec/60° Dimensions - inches Weight 1.6 x 0.8 x 1.5 1.5oz
Further Information
Type Motor Type Bearing Type Digital 3 Pole Ball Bearing