Align T-Rex 700 Nitro Pro Kit - Yellow and Blue Painted Canopy - KX018001TA/KX018001A

Check the discount page for some easily achievable discounts << Here >>

The Align T-Rex 700N RC model helicopter is simply the most eagerly awaited 90 sized Nitro powered helicopter on the market today.

High quality parts and upgrades are widely available at affordable prices which makes this heli the choice of most 90 sized nitro pilots!

Visit thetrexforums for the latest info on the new T-Rex 700 Nitro Pro << Here >>

Engine not included!

Kit Includes:
themodelhelistore.com
T-REX 700 Nitro Pro Kit x 1 set
Painted Fiberglass Canopy x 1
3K Carbon Fiber Flybar Paddles
3K Carbon Fiber Tail Blades
3K Carbon Fiber Boom
Aluminum Tail boom x 1
RCE-G600 Governor x 1
Torque Tube Driven Tail
Fuel Tube x 1
3-Way Fuel Filter x 1
New Fuel Tube clip (A) x 1
New Fuel Tube clip (B) x 1
Rear Frame Brace x 1
Switch Mount x 1
Repair towel x 1
themodelhelistore.com

Features:

1. Simple and light weight design provides awesome flight performance.
2. +-13°collective pitch is possible for extreme 3D performance.
3. Heavy duty tail with thrust bearings.
4. Clutch, Fan and Bell assembly provide a very smooth operation even at high RPM.
5. themodelhelistore.com
6. Forward mounted tail servo helps to keep exhaust oil from entering servo also improves the CG.
7. Battery tray designed for easy and clean radio gear installation.
8. Fuel Tank Capacity 630cc.
9. Torque Tube driven tail for incredible 90 sized performance.
10. Rigid frame design that can also handle hard crashes without damage.
11. Super engine cooling system very efficient airflow to provide unequaled cooling and horsepower.
12. New main gear with one-way bearing design for high torque.
13. Ready to fly weight (no fuel) is an incredible 4.2Kg!

T-REX 700 Nitro Pro Specs:
themodelhelistore.com
Length:1335mm
Height:450mm
Main Blade Length: 690~710mm
Main Rotor Diameter: 1562~1602mm
Tail Rotor Diameter: 281mm
Engine Pinion Gear: 20T
Autorotation Tail Drive Gear: 150T
Drive Gear Ratio: 8.2:1:4.54 (E:M:T)
Fuel Tank Capacity: 630cc.
Weight (Without Power System): Approx. 3200g

Additional Equipment Needed to Fly:
Transmitter (7-channel or more, helicopter system)
Receiver (7-channel or more)
themodelhelistore.com
Standard servo x4
Head lock gyro x 1
Specialized servo x 1
Pitch gauge x 1
Engine starter/Starter shaft x 1
11.1~14.8V Li-Po 2500mAh starter battery x 1
Fuel pump x 1
Engine fuel x 1
2 in 1 Voltabe regulator combo x 1
91 Engine x 1
690~710 Main Blades x 1
90 Muffler x 1
themodelhelistore.com